Filter
Top Products
39
Answering system settings
Number of rings
When the answering system is turned on, it answers all
incoming home calls after the number of rings set. You
can choose from two, four, or six rings; or toll saver. With
toll saver selected, the answering system answers after
two rings when you have new messages, and after four
rings when you have no new messages. This enables
you to check for new messages and avoid paying
unnecessary long distance charges if you are calling
from out of your local area.
To change the setting:
Using the telephone base:
Press the MENU softkey when the telephone base is
not in use.
Press /VOL
+
or VOL
-
/ to highlight Ans. system,
then press the SELECT softkey.
Press /VOL
+
or VOL
-
/ to highlight Ans sys setup,
then press the SELECT softkey.
Press /VOL
+
or VOL
-
/ to highlight # of rings, then
press the SELECT softkey.
Press /VOL
+
or VOL
-
/ to choose from 2, 4, 6 or
Toll saver, then press the SET softkey to conrm
your setting.
Using the handset:
Press the MENU softkey when the handset is not in use.
Press /VOL
+
/ or CID/VOL
-
/ to highlight ANS. SYSTEM, then press the
SELECT softkey.
Press /VOL
+
/ or CID/VOL
-
/ to highlight Ans sys setup, then press the
SELECT softkey.
Press /VOL
+
/ or CID/VOL
-
/ to highlight # of rings, then press the
SELECT softkey.
Press /VOL
+
/ or CID/VOL
-
/ to choose from 2, 4, 6 or Toll saver, then
press the SET softkey to conrm your setting; or press the BACK softkey
to exit to the previous menu without making any changes.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Ans. system
Directory
Call log
SELECT
Del all old
Record memo
Ans sys setup
SELECT
# OF RINGS
2
4
SET
Announcement
Call screening
# of rings
SELECT