Filter
Top Products
35
Answering system settings
Call screening
The call screening feature lets you listen to a caller leaving a message at the
telephone base. You can turn this feature on or off with either your handset or
telephone base.
To change the setting:
Using the telephone base:
Press the MENU softkey when the telephone base is
not in use.
Press /VOL
+
or VOL
-
/ to highlight Ans. system,
then press the SELECT softkey.
Press /VOL
+
or VOL
-
/ to highlight Ans sys setup,
then press the SELECT softkey.
Press /VOL
+
or VOL
-
/ to highlight Call screening,
then press the SELECT softkey.
Press /VOL
+
or VOL
-
/ to choose On or Off, then
press the SET softkey to conrm your setting.
Using a handset:
Press the MENU softkey when the handset is not
in use.
Press /VOL
+
/ or CID/VOL
-
/ to highlight
ANS. SYSTEM, then press the SELECT softkey.
Press /VOL
+
/ or CID/VOL
-
/ to highlight
Ans sys setup, then press the SELECT softkey.
Press /VOL
+
/ or CID/VOL
-
/ to highlight
Call screening, then press the SELECT softkey.
Press /VOL
+
/ or CID/VOL
-
/ to choose On or Off, then press the SET
softkey to conrm your setting; or press the BACK softkey to exit to the
previous menu without making any changes.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Ans. system
Directory
Call log
SELECT
Del all old
Record memo
Ans sys setup
SELECT
Answer ON/OFF
Announcement
Call screening
SELECT
CALL SCREENING
On
Off
SET