Filter
Top Products
47
Telephone operation
Handset speakerphone
During a call, press to switch between speakerphone and normal
handset use.
When in speakerphone mode, if no keys are pressed within ve seconds, the
keypad is locked automatically. Press the UNLOCK softkey to use the keypad.
Volume control
During a call, you can adjust the listening volume on the handset or
telephone base.
To adjust the listening volume of the handset:
Press /VOL
+
/ or CID/VOL
-
/ on the handset while on a call.
To adjust the listening volume of the telephone base:
Press /VOL
+
or VOL
-
/ on the telephone base while on a call.
Silence the ringer
When the home or cell line is ringing, you can temporarily silence the ringer
of the handset without disconnecting the call. The next call rings normally at
the preset volume.
To silence the ringer of the handset when there is an incoming call:
Press the SILENCE softkey or OFF/CLEAR on the handset and
Ringer mute appears.
To silence the ringer of the telephone base when there is an
incoming call:
Press the SILENCE softkey or CANCEL/ on the telephone base.
Ringer mute appears.
Mute
The mute function turns off the microphone. You can hear the caller, but the
caller cannot hear you.
To mute a call on a handset or the telephone base:
Press the MUTE softkey to turn off the microphone. The screen shows
Muted for a few seconds and MUTE appears until the mute function is
turned off.
To un-mute a call on a handset or the telephone base:
Press the UNMUTE softkey to resume the conversation. The screen
temporarily shows Microphone ON.
•
•
•
•
•
•