Filter
Top Products
46
When scrolling is disabled by un-checking the "Disable Scrolling" option, two screen
location options are available. "Screen Loc x" and Screen Loc y" set the position of the
M7100 viewable area relative to the upper left hand corner of the virtual tn5250 24x80
screen. This allows the user to "lock" the location of the viewable area within the entire
virtual screen.
Example: If the terminal was set for the Medium font, the screen can only show 20
columns and 20 rows. With scrolling disabled and "Screen Loc x" and "Screen Loc y"
both set to 0, the M7100 screen will always display the 20 top rows and the 20 top
columns.
If the Virtual 24x80 check box is unchecked all the text sent to the terminal will be forced
into the current display size (which depends on the font size selected). Most terminal
emulation screens are written for a 24 column by 80 character display size so this box is
unchecked by default.
If the Follow Cursor check box is checked then the screen will scroll to wherever the
cursor is on the display. This box is unchecked by default.