Filter
Top Products
43
Terminal Options
The Term setting determines what terminal type the M7100 will emulate. The default
setting is standard “VT100”. If you are using CommandLink™ software, set the Terminal
type to “amlterm”.
Note: When using amlterm with CommandLink™ the optional features are controlled
by the CommandLink™ server and are not selectable on the M7100 unit.
The currently available terminal emulations are “amlterm” which is only used with the
CommandLink™ application, “vt100” and “vt220” terminal emulations typically used
with UNIX based servers and “tn5250” terminal emulation typically used with IBM
AS/400 systems. Other terminal emulation types and features are available as optional
software packages.
Terminal Emulation - amlterm
The “amlterm” setting is used with the AML CommandLink™ software. The “amlterm”
emulation is a super-set of vt100 terminal emulation with special feature added to support
a CommandLink server.
The Local Echo feature enables or disables displaying of characters sent to the host
system. The default setting for most host systems is Local Echo disabled (unchecked).