Filter
Top Products
26
If there is not a wireless Access Point (AP) for the handheld terminal to connect to, then
the terminal will not proceed past this point. For help in determining the presence and
strength of an Access Point’s transmission see the Network Diagnostics section of this
manual.
Connecting
The following screen shows the M7100 handheld terminal connected to an Access Point.
The MAC address number for the access point is displayed at the bottom of the screen.
After the M7100 handheld terminal connects (associates) with an access point, it attempts
to connect to an active CommandLink™ Server.
Note: If there is not an RF Server active for the M7100 handheld terminal to connect
to, then the terminal will not proceed past this point!
Login
The following graphic shows a typical login screen for the CommandLink™ RF server. If
you are using your own server, the login screen will be different. For help in determining
the presence of a CommandLink™ Server see the CommandLink™ documentation.
If the User ID or Password is not listed on the CommandLink™ database a Login Error
screen will appear.