Filter
Top Products
20
To determine if the GSM/GPRS card is functioning properly, use the M7100 Menu System and
select “Network Setup” and one of the following screens should appear:
If the screen does not say “STAT: Connected” then you are out of range of a GSM/GPRS
Cellular Network, or you have the GSM/GPRS modem settings wrong.
To determine the amount of data being sent by the GSM/GPRS card, use the M7100 Menu System
and select “Diagnostics > RF Link Status” and see the “Network Status GSM/GPRS”.
GSM/GPRS Error Messages
There are numerous error messages that may appear. These error messages are logged on the
M7100 by the “syslog” system and stored in the volatile file named “var/log/messages”.
Connection
Failed!