Filter
Top Products
112 | Experiencing Multimedia
Use Video capture modes
While using the Video capture mode, you can press CAMERA on the device or ENTER
on the NAVIGATION control to start recording a video clip (with audio if desired). To stop
recording, press CAMERA or ENTER again. Your device displays the first frame of the
captured video clip by default on the Review screen.
Before you capture a video clip, you can specify the recording limit in terms of time and
file size on the Camera Settings screen so that the recording stops automatically when the
clip size reaches that limit.
You can set the capture format to either Motion-JPEG AVI or MPEG-4 on the Camera
Settings screen.
Use the Review screen
To access the icons on the Review mode screen
1. In Camera mode, tap Tools > Options > General tab.
2. Select the Review after capture check box.
Note that this check box is selected by default to allow you to review the image or video
clip after it has been captured.
Use zooming
While capturing a still image or a video clip by using the camera, you can zoom in to
make the object in focus move closer, and you can zoom out to make the object move
farther away. In all capture modes, use NAVIGATION on your device, or tap the triangular
Up arrow next to the Zoom Ratio indicator, to zoom in a still image or an incoming video
stream. When the zooming limit is reached, you will hear a beep. To zoom out, press
NAVIGATION down, or tap the Down arrow. The camera zoom range for a picture or a
video clip depends on the capture mode and capture size. Following is a summary.