UTStarcom PPC 6700 PDAs & Smartphones User Manual


 
Getting Started | 9
1
POWER/Backlight
Button
Press to turn your device on or off. Press and hold to turn the
backlight on or off.
2 MiniSD Card Slot Insert a storage card (MiniSD) for storing data.
3 Antenna
4 Notification LED 1
Bi-color LED on the left side: Blue and Green for Bluetooth system
notification of powered-up and ready to transmit radio frequency
signal, and Wi-Fi status.
5 Notification LED 2
Bi-color LED on the right side: Green and Orange for CDMA standby,
SMS message, CDMA network status, notification, battery charging
status.
6 Speaker Listen to a phone call from here.
7 Touch Screen Use to write, draw, or make a selection with the stylus.
8 Left SOFT KEY Press to perform the command shown in the label above the button.
9 START Button Press to open the Start menu.
10 OK Button Press to verify your data entries, or to exit the program in use.
11 Right SOFT KEY Press to perform the command shown in the label above the button.
12 END Button Press to end a call.
13 NAVIGATION Control
Press this multi-directional control up, down, left, or right to move
through menus, program instructions; carry out the selection by
pressing ENTER (the center button).
14 TALK Button
Press to answer an incoming call or dial a number. Press and hold to
turn speakerphone on or off.
15 Infrared Port Lets you exchange file(s) or data with other devices wirelessly.
16 Internet Explorer Press to quickly launch Internet Explorer.
17 Volume Press up or down to adjust the volume.
18 Voice Recorder Press to record a voice note.