Filter
Top Products
ZEPHYR
XPORT
USER’S GUIDE
CHAPTER 7 - SPECIFICATIONS & WARRANTY 43
• Dynamic Range
• No Decoder Lock: 94 dB
• Encoder/Decoder loopback: 91 dB
• THD (Line input, 100 Hz to 10 kHz @ +4 dBu):
0.05%
HEADPHONE OUTPUT
• Level (level control @ maximum and nominal
input level at line input): ~ 103 dBa SPL
MONITOR MIX OUT (Floating Balanced ¼”
TRS) Mix POT set to “Send”:
• Level: +4 dBu (20 dBu clip)
• Impedance: ≤ 50 Ω
• Noise floor (Mic & Line inputs off): -85 dBu
• THD (Line input, 100 Hz to 10 kHz @ +4 dBu):
0.01%
PROCESSOR/LIMITER
Digital 2 band AGC and look-ahead limiter.
Ensures that the encoder is fed an optimal input
signal at all times. Settings for VOICE or MUSIC.
The VOICE setting is tuned to reduce the effects of
harsh sibilants on the perceptual coding algorithms.
POTS interface
• Protected by self resetting fuses
• User selectable country selection allows
operation internationally.
• 6-Position/4-Pin miniature modular connector
(RJ-11 style) with connections on the center
pins (pins 3 & 4)
ISDN Interface (optional)
• Supports National ISDN-1, DMS Custom, 5ESS
Custom PTP, ETS 300 (Euro ISDN), INS 64
(Japan) protocols. Physical interface as
described below:
• International version: Supports 4-wire ISDN S
interface on a 8-position/8-pin miniature
modular connector (RJ-45 style)
• USA & Canada version: 4-wire ISDN S interface
on a 8-position/8-pin miniature modular
connector (RJ-45 style) and the 2-wire ISDN U
interface on a 6-position/4-pin connector (RJ-
11 style)
REMOTE CONTROL
Remote control supported using popular web
browsers over 10/100 Base-T Ethernet.
ANCILLARY DATA
Two contact closures in each direction.
• Inputs: Integral 10K ohm pull-up to 5 volts.
External pull-ups can be used to support
higher voltages.
• Open collector, sinks up to 250 mA
RESOLUTION
•
24-bit
POWER SUPPLY
• Internal, auto configuring.
• 100 to 240 volts ac 47-63 Hz
• 390 watts max
• CE Approved
DIMENSIONS
9.25 x 12.75 x 3.5 inches (23 x 32 x 9 cm)
SHIPPING WEIGHT
7.5 Lbs ( 3.4kg)
CE Approved