Filter
Top Products
ZEPHYR
XPORT
USER’S GUIDE
CHAPTER 3 - THE DETAILS 29
playback.
4. Click "OK"
Changing the playback volume
The Telos Soundcard Emulator
supports Windows ® mixer device
interface. To change the playback
volume, use the fader or volume control
available in your playback application,
or you can use the Windows Volume
Control tool.
To start the Windows Volume Control,
click on speaker icon on the taskbar.
Make sure correct mixer device is
selected. Go to “Options” to popup
“Properties” window.
3.9 Remote Control
The Xport can be controlled using a web browser. The Xport would need to be
connected to the same network (LAN or WAN) as the computer and both units will need
IP addresses. If the Xport is to be accessed from outside the local network a gateway IP
address will need to be entered as well. These items are configured in the Ethernet
Setup… sub menu of the Xport.
One everything is configured, simply type "http://123.345.567.789" (use the Xport's IP
address here) into your browser to connect to the Xport. You will be prompted for a
password. The default password is "Telos" (this is case sensitive).
We've tested Xport with the following browsers: ???