Filter
Top Products
ZEPHYR
XPORT
USER’S GUIDE
12 CHAPTER 2 - GETTING STARTED
For example:
Press the number 2 once...... See the character
A
... press it again...... See the character B
... press it again...... See the character
C
... press it again...... See the character
a
... press it again...... See the character
b
... press it again...... See the character
c
... press it again...... See the numeral 2
... press it yet again...... the cycle starts again from A
To move to the next character in a field, tap any other key or press the <
6> button.
To back up, press the <
5> key.
2.3.2 Frequently Used Menus; AUTO, DIAL, & DROP
AUTO
The AUTO menu is used to enter or activate Dial Setups and Location Setups.
The <AUTO> key allows access to Zephyr Xport’s 100 stored Dial Setups (#00 to
#99). These can be accessed by pressing <AUTO>, entering two digits, and then
pressing <AUTO> again.
It can also be used to access the 30 Location Setups (#100 to 129) can be accessed
to configure the ISDN settings for frequently visited locations. Press and hold the
<
6> key to scroll to the Location Setups. Or, press <AUTO> enter 3 digits and
press <AUTO> again.
See section 3.3 for more on Setups.
DIAL
The <DIAL> key is used to manually dial a number. Press, <DIAL>, enter the phone
number and press <DIAL>. To redial the last number dialed simply press <DIAL> twice.
h HOT TIPS ON DIALING!
1) If your phone line has the feature "call waiting," you should temporarily disable this by
entering "*70" (or other special code) before the number to be dialed.
2) In some cases, you may need to cause the Xport to pause during dialing (for example
when a special access code is used). Press the <#> or <*> key twice to insert a one second
pause (the "," character will be displayed). Multiple pauses may be entered.
The DIAL menu
The DIAL menu appears after the Dial button has been
pressed and looks like the following:
The Mode determines the type of call to be placed as follows:
Xport
Places a call using the POTS interface to a Zephyr Xstream at the far end. The Xport
mode uses aacPlus and the Xport's built-in DSP modem.