Filter
Top Products
ZEPHYR
XPORT
USER’S GUIDE
CHAPTER 2 - GETTING STARTED 7
If successful, the words "Connect Lock"
will appear along with a call duration
timer.
You should now see audio on the Receive
audio meter (labeled "Rcv") moving as the
audio is received from the test line.
Put on your headphones and listen. You may adjust the relative volume of your local
microphone audio and the audio from Telos by adjusting the MIX control on the
Xport's front panel.
4. Whether or not you have successfully connected, press the <DROP> button twice.
You want to be sure to disconnect, as this may be an expensive call.
5. If you have successfully connected, go on to the next section. If you have not, try
again. If you do not succeed, here are a few things to try:
• Wait an hour and try again. The Telos test line may be busy.
• If you need to dial a prefix (such as 9) try entering a pause after this digit and
before the rest of the number it by pressing <#> twice (a "," will be displayed)
when dialing.
• USA users should try calling using a different long-distance carrier. To do so,
insert the carrier’s seven-digit access code. The number to dial starts with any
prefix needed for you to get an outside line, followed by the long distance
access code, followed by the Telos test line number. See section 5 for additional
codes. Let us say you don’t need a prefix to dial out (and most people don’t)
and you want to use MCI. Dial:
1010222 1 216- 781- 9310
If this works, you should contact your local telephone company to determine
who your default long distance carrier is.
• Review the information in Section 5 (What if to do if…).
• Call Telos Customer Support for assistance. The Xport may provide error
messages under some circumstances. Have these messages ready when you
call, as they will help speed the process of solving your problem (see page iii).
What’s Next?
Now you are ready to call the world. Remember your promise to read the entire manual!
Reading the rest of this section will fill you in on the basics. Section 3 covers additional
features. Section 8 (References) gives references for information on seldom- used
features and other technical information.
Further assistance in using your Zephyr
XPORT
can be found in the HELP text that is
displayed whenever you select a menu item using the <SEL> key. You may wish to go
through the menus and select various items to learn more about what they do.
Snd
════════
Rcv
════════
Connect Lock 0:00:05
Modem Performance
Snd
════════
Rcv
════════