Filter
Top Products
Section 12: Bluetooth and Wi-Fi Services 161
Changing Connection Information
Section 12
displays.
2. To connect to other Wi-Fi network, tap and hold SSID of
the Wi-Fi network you want, then select Connect in pop
up menu.
3. In the Networks to access box, tap the type of network
you want to connect to (All Available, Only access
points, or Only computer-to-computer).
4. To connect only to networks that have already been
configured, clear the Automatically connect to non-
preferred networks checkbox, if necessary.
Note: If you check the Automatically connect to non-preferred networks
checkbox, your Pocket PC will detect any new networks and provide you
the opportunity to configure them.
5. Tap to return to the Connections screen.
Changing Connection Information
Using either the Wireless or Network Adapters tabs
under “Network Card,” you can change your connection
information. If your Wi-Fi network encrypts data with a
security key (WEP) or you need WPA authentication to
connect to your Wi-Fi network, you can set the
configurations under Wireless tab. The Network
Adapters tab allows you to choose whether you use a
fixed IP or the DHCP (Dynamic Host Control Protocol).
To get connection information of Wi-Fi network that you
are connected to, follow these steps:
1. Tap Start located in the upper left corner of the screen.
2. Tap Settings, then tap the Connections tab.