Filter
Top Products
4-36 Operation with a Full Function Handset
4.4.16.11 Using the DSC Log
The RAY215 maintains 3 separate logs for storing information about sent
and received DSC calls. The logs are divided by type:
• Individual, All Ships, and Group Calls
• Distress Calls
• Relay Distress Calls
Each log can store up to 10 calls. If more than ten DSC calls of a particular
type are logged, the oldest one is deleted as the new one comes in.
To view a log:
1. Press FUNC followed by LOG/CLR to enter DSC Log mode. LoG appears
on the seven segment display and the log type appears on the dot
matrix display.
2. Press the SQ UP/DOWN keys to scroll through the available logs:
DISTR for Distress calls
I/A/G for Individual/All Ships/and Group Calls
RELAY for Relay Distress Calls
3. When the desired log appears, press ENT to accept. The log number
appears next to the log type, beginning with 0, the latest entry.
4. Press the SQ UP/DOWN keys to scroll through the entry numbers 0-9
for the particular log. After one second of displaying the log entry
number, the log data for that entry begins scrolling across the dot
matrix display, containing the following information:
• Type of call
• MMSI number
• Nature of the call (Routine, Safety, or Urgency), if applicable
• CLR-EXIT
• ENT-DELETE
If no call exists for a particular log entry number, the data appears as all
dashes (-).
5. Press the CLR key to delete the log entry from memory or press CLR to
exit DSC Log mode without making changes. If an entry is deleted, the
next older entry assumes the deleted entry’s number. For example, if
log 1 is deleted, log 2 becomes log 1, log 3 becomes log 2, and so on.