Filter
Top Products
3-4 Operation with a Fist Microphone
The lower bar graph on the LCD displays the squelch level.
"
SCAN/ MEM Key
This key starts or stops All Scan and Memory Scan Modes. The key
also places favorite channels into the radio's memory for quick
selection.
Pressing and holding SCAN/MEM for 3 seconds stores into memory
the currently displayed channel and illuminates the MEM indicator
on the LCD. If the current channel has already been stored, pressing
SCAN/MEM removes the channel from memory and extinguishes
the MEM indicator.
Pressing and releasing SCAN/MEM when no channels have been
entered into memory initiates a scan of all available channels. The
SCAN indicator illuminates on the LCD.
When at least one channel has been programmed into memory,
pressing and releasing SCAN/MEM causes the MEM and SCAN
indicators to flash for 3 seconds. If the key is pressed again while
these indicators are flashing, the radio enters All Scan mode.
However, if the 3 seconds expire before pressing the key a second
time, the radio initiates a scan of only those channels programmed
into memory.
Pressing the SCAN/MEM key during All Scan or Memory Scan
terminates the scan.
#
WX/INT Key
Pressing and releasing WX/INT switches between the Weather
channel and the last used marine channel. Pressing and releasing
WX/INT while in the Dual Watch mode places the unit in Tri-Watch
mode. While in either Weather or Tri-Watch modes, the WX indicator
illuminates on the LCD.
Pressing and holding WX/INT for 2 seconds switches between the
US, Canadian, and International frequency groups. While in the
International Frequency mode, the INT indicator illuminates on the
LCD. While in the Canadian mode, the CAN indicator illuminates.
There is no indicator for US mode.
$
MON/ 1/25 Key
Pressing and releasing MON/1/25 initiates the Dual-Watch Monitor
mode.