Filter
Top Products
3-10 Operation with a Fist Microphone
3.3.9 Priority Channel
Either channel 16 or 9 can be programmed as the Priority Channel.
To switch to the currently programmed Priority Channel at any time, press
the 16/9 key once.
To change the Priority Channel , press the 16/9 key once to switch to the
Priority Channel, then press and hold the 16/9 key until a tone is heard.
When the Priority Channel is active, a "P" appears in the small character
display.
3.3.10 Desensitized Reception (Local Mode)
You can set the RAY215 to reduce the receiving sensitivity in high traffic
areas to decrease unwanted reception. This is also known as local mode.
To select this mode, press and release the D/L key. While the desensitize
function (local mode) is active, the DESENS indicator appears in the LCD
display. To return to full receiver sensitivity (distant mode), again press
and release the D/L key.
3.3.11 Channel Memory
The RAY215 can store any US, Canadian, or International Channel. The
stored channels are the ones scanned in the Memory Scan mode.
To store a channel in memory, select the desired channel with the CH
knob and press and hold the SCAN/MEM key for 2 seconds. A tone sounds
and the MEM indicator is displayed. (Weather channels can not be stored
into memory).
To clear a channel from memory, select the memory channel and press
and hold the SCAN/MEM key for 2 seconds. The MEM indicator
extinguishes, indicating that channel is no longer stored in memory.
3.3.12 Resetting Factory Defaults
You can reset many radio settings back to their factory defaults:
• Erase any channels stored in memory for the Memory Scan function
• Erase any MMSI numbers stored in the base station for Individual Ship's
Call
• Turn OFF the backlight on the base station and Full Function Handset
• Return to US channels, if INT or CAN are selected
• Return the Weather Channel to channel 0
• Return the Priority channel to channel 16