Filter
Top Products
3-2 Operation with a Fist Microphone
3.1.2 Microphone/Handset Connections
The Fist Microphone can be connected to the port on the front of the base
station (Figure 3-2) or mounted near the base station using the optional
Handset Relocation Kit (part number E46026), which is available from
your authorized Raymarine dealer/distributor. The Relocation Kit must
be connected to the HANDSET/RELOCATION KIT port on the rear of
the base station (Figure 3-1).
If both a Fist Microphone and Second Station Full Function Handset are
to be used, the Fist Microphone must be connected to the front port with
the Full Function Handset connected to the HANDSET/RELOCATION
KIT port on the rear. In this case, the Handset Relocation Kit could not be
used with the Fist Microphone. Once installed, the two stations can
communicate with one another using the Intercom function described in
Section 4.4.12.
Figure 3-1 Rear Connections