Filter
Top Products
3-25
Operation with a Fist Microphone
Receiving an All Ships Call
If you are currently on a selected working channel, in the Monitor mode,
or in the Scan mode, the radio automatically enters DSC mode when an
All Ships Call is received. The type of call is displayed in the small channel
display and an alarm is sounded.
Press the DSC/PRI key once and the radio automatically selects channel
16. There is no acknowledge required for an All Ships Call. If you do not
wish to accept the call, press the 16/9 key to exit the DSC mode.
PRESS & RELEASE
DSC
Receive All Ships Call:
Routine, Safety, or Urgency
Converse on channel 16
3.3.17.4 Group Call
The Group Call feature sends transmissions that are only received by
radios that share a common Group MMSI number.
The RAY215 requires an optional Full Function Handset to program in
the Group MMSI number. For this reason, a RAY215 equipped with only
a Fist Microphone cannot send or receive Group Calls.
If you have used an optional Full Function Handset to program in the
Group MMSI number, you may use a RAY215 equipped with a Fist
Microphone to receive Group Calls, even if the Full Function Handset is
no longer attached. However, you cannot send Group Calls without the
Full Function Handset.
If you are currently on a selected working channel, in the Monitor mode,
or in the Scan mode when a Group Call is received, the radio automatically
enters DSC mode, sounds an alarm, and displays the type of call as follows:
"Gr" for ROUTINE Group Call
"GS" for SAFETY Group Call
"GU" for URGENCY Group Call