Filter
Top Products
5. Communicating Within Your Office
ICX-35-750 ICX (International), issued March 1999 59
Note: Automatic Camp-on (Call Waiting) requires system programming.
1. Pick up the handset or press the ON/OFF key.
2. Dial the extension number. (The called party hears an alert tone and you hear
ringback tone.)
3. Remain on the line until the called party answers.
1.
Press the
MSG
key
.
2. Enter the send text message number (1-9, 0). (See Table 6 on page 57 for the send
text messages.)
1.
Press the
MSG
key
.
2. Enter the reply text message number (1-9, 0). (See Table 7 on page 58 for the text
message replies.)
1. Do one of the following:
USING MESSAGE WAITING/CALLBACK
You can leave a callback request message (or message waiting indication) for a busy
extension or one that does not answer. After sending the callback message, you hang
up the phone and wait for the call back. The called party’s message indicator lamp
then flashes that a message has been received.
To . . . Do . . .
Answer a call
a.
After receiving an alert tone, replace the handset or
press the
ON/OFF
key to end the first call.
b.
Lift the handset or press the
ON/OFF
key again to
connect to the waiting call..
Toggle between two calls (using
Broker’s Hold)
a.
After receiving an alert tone, press the
HOLD
key to
put the first call on hold.
b.
Press the
ON/OFF
key to pick up the second call.
To use Automatic Camp-on (Call Waiting)
To leave a text message while camp-on
To reply to a text message
To answer a Camp-on (Call Waiting) signal