Filter
Top Products
2. Setting Up Your Phone
ICX-35-750 ICX (International), issued March 1999 25
3. Press the one-touch key to be checked. (Programmed data appears on the
display.)
4. Replace the handset or press the ON/OFF key.
SETTING UP SPEED DIALLING
You can set up the following speed dial features using your phone’s one-touch or
soft keys:
• Speed dial numbers
• Speed dial linking
• Speed dial names
Assigning and Deleting PSD Numbers
You can assign frequently called numbers (or System Speed Dial [SSD] numbers) to
your phone’s one-touch or soft keys. These keys are preprogrammed to correspond
to specific PSD codes or bins. You store your PSD numbers in these bins. When you
press a one-touch or soft key containing a PSD number, the PSD bin associated with
that key is accessed and the speed dial number is dialled.
You can assign up to 10 PSD numbers to the one-touch keys on a non-display or
small-display phone (PSD bins 80-89) and up to 20 PSD numbers to the soft keys on
a large-display phone (PSD bins 80-99).
When in the PSD Directory Mode, you can view the PSD bin numbers on the
display. On a small-display phone, two bins are displayed at a time. To display the
next two bins, press the # key. To display the previous two bins, press the * key. On
a large-display phone, 10 PSD bins are displayed at a time. To display the next 10
bins, press the NEXT key. To display the previous 10 bins, press the PREV key.
For a list of corresponding PSD bin numbers and one-touch or soft keys, see Figure
16 and Table 4 on page 26.
Notes:
• On a small-display phone, you must be in the PSD Directory Mode to assign,
access, or view numbers in PSD bins 90-99. On a non-display phone, you
access or assign numbers to PSD bins 90-99 by pressing the MEMORY key
and entering the PSD bin number. (To review the PSD numbers on non-
display phones, refer to your customized list of PSD numbers in Appendix B
“Customized PSD Bin Numbers” on page 83.)
• Until you assign a name or string of characters to a PSD number, the PSD bin
number will display when you press the one-touch or soft key. For more
information, see “Assigning and Deleting Names for PSD Numbers” on page
29.