Filter
Top Products
2. Setting Up Your Phone
ICX-35-750 ICX (International), issued March 1999 27
OR
• Enter the Speed Dial Set/Clear code (default = 710 (HK/UK) or 710#).
3. Enter the PSD bin number (80-99).
4. Enter the phone number you want to be speed-dialled (maximum length = 16
characters). Remember to include the Intercom Level or MCO Code level code
depending on how the system is set up. (Refer to the following table.)
Table 5. Characters allowed when assigning PSD numbers
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
To insert a . . . Enter/Press...
Digit or character
0
,
1
-
9
,
*
,
#
Intercom Level*
MEMORY * #
MCO Code
9
(UK/HK),
0
(Taiwan, Malaysia, Indo-
nesia) **
MEMORY * 0
MCO Code 81**
MEMORY * 7
1
MCO Code 82**
MEMORY * 7
2
MCO Code 83**
MEMORY * 7
3
MCO Code 84**
MEMORY * 74
Pause
FL/R
DP - DTMF Code
MEMORY * *
SSD Code
MEMORY NN(N)
Hyphen (-)
PROG
Display Number (Start / Stop) ***
MEMORY * 2
DTMF Conversion After the Other Party Answers
MEMORY * 3
(Version 3.5
and higher)
*
Indicates that the digits that follow are either a feature access code or extension
number. (Do not include if system is set for Intercom Level.)
**
Indicates that the digits that follow are for an outside number. (Do not include if
system is set for Trunk Level.)
***Indicates that the enclosed digits should not be displayed during dialling. Must
precede and follow the digits that you do not want displayed.
Example: MEM-
ORY *2 555-4143 MEMORY *2.