2. Setting Up Your Phone
26 ICX (International), issued March 1999 ICX-35-750
• You can check PSD numbers or names that have been assigned to one-touch
or soft keys. For more information, see “Checking Speed Dial Numbers” on
page 40.
Figure 16. One-touch and soft key numbering scheme
Table 4. Corresponding one-touch or soft keys and PSD bin numbers
Note: Before assigning PSD numbers, you must determine whether the system is
set up for Intercom Level (programmed to dial an inside line) or MCO Code level
(programmed to dial an outside line). Depending on the system set up, you must
include the appropriate dialling code as part of the PSD number. To determine which
code to use, see Table 5 on page 27.
1. Pick up the handset or press the ON/OFF key.
2. Either:
• Press the PROG key and then press the MEMORY key.
One-touch or soft key Corresponds to PSD bin on ...
Small-display and
non-display phones
Large-display phone
80 80 or 90
81 81 or 91
82 82 or 92
etc.
3
10
9
8
7
6
5
4
2
1
02:28 Thu NO V 14
Langford S 173
PROG
CONF
2 3
109876
541
Large-display phone soft keys
Small-display phone one-touch keys
1
2
3
To assign a PSD number to a one-touch or soft key