Panasonic Section750 Telephone User Manual


 
2. Setting Up Your Phone
ICX-35-750 ICX (International), issued March 1999 29
Notes:
Before linking multiple SSD numbers to a PSD bin, the SSD bins must
already have been programmed with the appropriate speed dial information.
(This requires system programming.)
If numbers do not appear on the display (00-79 or 000-799) when you use
SSD codes, your extension is not programmed to display that data.
1. Pick up the handset or press the ON/OFF key.
2. Either:
Press the PROG key and then press the MEMORY key.
OR
Enter the Speed Dial Set/Clear code (default = 710 (HK/UK) or 710#).
3. Press the soft or one-touch key (for the PSD bin [80-99]) to be programmed.
4. Press the MEMORY key.
5. Enter the SSD bin number that contains the first part of the number to be dialled.
(If a pause is required, press the REDIAL key.)
6. Repeat steps 4-5 (up to 5 more times) for each remaining SSD number to be
linked.
7. Press the HOLD key when you are finished.
8. Replace the handset or press the ON/OFF key.
1. If necessary, select the trunk group (9 [UK/HK], 0 [Tawain, Malaysia, Indonisia],
or 81-84) to access an outside line. (Normally the trunk is selected by the speed
dial numbers.)
2. Press the PSD key.
Assigning and Deleting Names for PSD Numbers
After assigning a PSD number to a one-touch or soft key, you can assign a name to
the key (e.g., “Home,” “John,” etc.). You can then view the assigned PSD name
when you are in the PSD Directory mode.
To link speed dial numbers to a PSD bin
To use a PSD key that links multiple speed dial numbers