Filter
Top Products
5. Communicating Within Your Office
ICX-35-750 ICX (International), issued March 1999 55
more than one call. The Split key must be set up by the system administrator or
dealer.
1. While on a call, press the OHVA Split key.
2. Speak with the announcing party.
3. Press the OHVA Split key to return to the original call.
Transferring Calls with an Announcement
Note: This feature requires system programming or a specific ICX configuration,
and may not be available. For information, see your system administrator or ICX
dealer.
1. While remaining on the line with the original party, press the HOLD key.
2. Dial the extension number.
3. When you hear a busy tone, press 8.
4. Make your announcement.
5. When you are connected to the called party, replace the handset or press the ON/
OFF key.
USING CALL FORWARDING
You can send or forward your calls to another extension, an outside line, or to voice
mail from either your extension or from an alternate extension.
Notes:
• Any outside number used for Call Forwarding must already be programmed
into system speed dialling.
• Calls cannot be forwarded to an extension that already has Call Forwarding
set or Do-Not-Disturb (DND) turned on.
• The system allows you to cancel Call Forwarding and DND for your
extension in one step.
1. Pick up the handset or press the ON/OFF key.
To speak to the announcing party
To transfer a call while making an announcement
To set Call Forwarding