Filter
Top Products
2.2 Installation of the Hybrid IP-PBX
48 Installation Manual
2.2.10 Wall Mounting (AC Adaptor)
CAUTION
Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire
laths or metal plates in the wall.
1. Place the reference for wall mounting on the following page on the wall to mark two screw
positions.
2. Install the screws and washers (included) to the wall.
Notes
• Make sure that the screw heads are at the same distance from the wall.
• Install the screws perpendicular to the wall.
3. Hook the AC adaptor on the screw heads.
Note
Be careful not to drop the AC Adaptor.
110 mm
Drive the screw
to this position
Washer
Wooden
Wall