Filter
Top Products
2.8 Connection of 2.4 GHz Portable Stations
124 Installation Manual
When the PS has already been registered to another Hybrid IP-PBX
One PS can be registered to a maximum of 4 different Hybrid IP-PBXs.
Setting the System Lock
When a system lock has been set, the system lock password will be required for PS system
setting.
Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong Hybrid IP-PBX, a PIN for PS registration can be set
to the Hybrid IP-PBX. Before registering the PS to the Hybrid IP-PBX, register the PIN set to
the Hybrid IP-PBX into the PS. By doing so, the PS will only be registered to the Hybrid IP-PBX
with the matching PIN.
Notes
• By default, the PIN for PS registration is "1234" for both the Hybrid IP-PBX and PS.
Therefore, the PS can be registered to the Hybrid IP-PBX without setting the PIN.
• The PIN for PS registration will only be used when registering the PS to the Hybrid
IP-PBX. Therefore, even when there is more than 1 Hybrid IP-PBX with the same PIN
near the PS, the PS will not be linked to a different Hybrid IP-PBX during normal
operation after registration.
Setting the PIN for Hybrid IP-PBX
Setting the PIN for PS
Choose
"SYSTEM 1–4".
Select
"REGISTRATION".
S1S1
SEL SEL
C.Tone
S1
Choose
"Enable/Disable".
SEL
ENTR
S1
S1
S1
S1
CHNG
SEL
ENTR
Select
"SYSTEM LOCK".
C.Tone
System Lock Password System Lock Password
4 digits
4 digits
ENABLE
DISABLE
[692]
1 to 4 digits
PIN for PS Registration
END
ENTER ENTER
1234
Select
"CHANGE PIN"
S1
ENTR
S1
SEL
C.Tone
1 to 4 digits
PIN for PS Registration
1234