Filter
Top Products
2.11 Auxiliary Connection for Power Failure Transfer
Installation Manual 139
Switch Settings
RJ45 Connector LINE 1 Pin Assignments
RJ45 Connector LINE 2 Pin Assignments
Switch Type Usage and Status Definition
PFT Setting DIP Set all DIP switches to "ON" positions to use LINE 1 and
LINE 2 as a PFT port.
LINE 1: Power Failure LINE (NT1)
LINE 2: Power Failure EXTN (extension)
No. Signal Name Level [V] Function
1-2 Reserved ––
3 TX1 (+) Transmit data 1
4 RX2 (+) Receive data 2
5 RX1 (-) Receive data 1
6 TX2 (-) Transmit data 2
7-8 Reserved ––
No. Signal Name Level [V] Function
1-2 Reserved ––
3 RX2 (+) Receive data 2
4 TX1 (+) Transmit data 1
5 TX2 (-) Transmit data 2
6 RX1 (-) Receive data 1
7-8 Reserved ––
8
1
8
1