Filter
Top Products
2.8 Connection of 2.4 GHz Portable Stations
Installation Manual 117
2.8.5 Site Survey
The PS has a Radio Signal Test mode that monitors the state of the radio link to the CS. After
installing the CSs temporarily, set the PS to the Radio Signal Test mode and measure each CS
coverage area. Then, record the results on the map of the installation site.
Testing the Radio Signal Strength
Note
The display language for the site survey is available only in English.
1. Enter the Radio Signal Test mode.
Notes
*1: CS number and radio signal strength level.
*2: Scan data (test result) number. Empty memory space will be indicated by a number;
stored memory space will be indicated by a "-".
Display example:
Press 1, 9, and POWER
for more than 2 seconds.
<< SEARCHING >>
CS NO.1 LEVEL:12
*1
SAVE:0123456789
*2
1 to 9
CS No.
1
9
9
0 to 9
Scan Data No.
To store the scan data