Filter
Top Products
2.9 Connection of Doorphones and Door Openers
132 Installation Manual
Connection of Door Openers to DPH4 Card
Use 8-pin and 10-pin terminal blocks (included with the card) for connection.
1. While pressing down on the hole at the top of the terminal block using a screwdriver, insert
the wire into the side hole as shown below. Repeat this procedure for other doorphones
and door openers.
Refer to "2.5.1 DPH4 Card" and "2.5.2 DPH2 Card" for pin assignments.
2. Attach the terminal blocks to the connectors of the DPH4 card on the Hybrid IP-PBX.
Doorphone
Door Opener
To door openers