Filter
Top Products
2.7 Connection of DECT Portable Stations
Installation Manual 101
Connecting the CS
1. Connect the cable from a hybrid extension port, the DLC4/DLC8 card to the CS.
2. Pass the cable through the groove of the CS (in any direction depending on your
convenience). Wrap the cable once around the ferrite core. Then close the case of the
ferrite core.
Note
If you need to open the ferrite core, use a flathead screwdriver to unlatch the case of the
ferrite core.
Modular
To a hybrid extension port,
or DLC4/DLC8 card
To a hybrid extension
port,or DLC4/DLC8 card
TO MAIN UNIT
/ PABX