Filter
Top Products
3.3 Installation of the KX-TDA Maintenance Console
154 Installation Manual
File Transfer PC to PBX (SD Card) The programme files in the PC are transferred to
SD Memory Card of the Hybrid IP-PBX.
Programme files in the SD Memory Card is
overwritten in this process.
File Transfer PBX (SD Card) to PC The programme files in the SD Memory Card are
transferred to the PC.
SD Card File View and Load The name, date, time, and size of programme
files in the SD Memory Card are viewed, then
these files are transferred to each optional
service card in the Hybrid IP-PBX.
SD Card File Delete The programme files in the SD Memory Card are
deleted.
Message File Transfer PC to PBX The message files for Outgoing Messages in the
PC are transferred to all MSG cards mounted on
the OPB3 card of the Hybrid IP-PBX. Available
only when at least 1 MSG card is installed.
Message File Transfer PBX to PC The message files for Outgoing Messages in the
MSG cards mounted on the OPB3 card are
transferred to the PC. Available only when at
least 1 MSG card is installed.
Error Log The error log is displayed (for details, refer to
"4.1.5 Troubleshooting by Error Log").
ISDN Protocol Trace Displays ISDN protocol trace data of the BRI/PRI
card.
Digital Trunk Error Report Displays the errors on digital trunks that are
collected in the past for selected time units (10
min, 30 min, 1 h, or 24 h).
CS Information Displays the internal information of the CS.
PS Information Displays the registration information of the PS.
Timed Update Updates the programmes in the LPR cards
(optional service cards with local processors)
when newer programmes are found in the SD
Memory Card by comparing them at a preset
time. (During the update, the cards become out
of service.)
System Reset
Reset by the Command
Resets the connected Hybrid IP-PBX. (It is the
same as pushing the Reset Button with the
System Clear Switch in the normal position.)
After using this command, you have to restart the
KX-TDA Maintenance Console and connect to
the Hybrid IP-PBX again.