Filter
Top Products
Operation
90 User Manual
If the destination is busy or you misdial
To split the calls
• The availability of this feature is depending on the contract with your telephone company.
• System programming is required. Consult your dealer.
• It is impossible to seize any other CO line during ISDN Call Hold.
• After completing the ISDN Call Transferring service, the CO line will be released. You
cannot return to the held call.
• If you go on-hook except for while hearing ringback tone or during a conversation
with the third party, ISDN Call Hold will be canceled and the system will hold the call.
• To return to the conversation before the destination answers, press TRANSFER
(DPT), Recall (SLT), or R key (ISDN Extn.).
• It is possible to make a call by using One-Touch Dialling. If the dialled number starts with
0, 81, 82, or 83, these numbers will be disregarded automatically, even in the case that it
is not a line access number.
• If your extension has been restricted, you might not be able to transfer a call to an
external party. Restricted will be displayed, and you will hear reorder tone.
• Automatic Route Selection (ARS) will not be applied to the call dialled after 5 .
• The number dialled after 5 will not be recorded to Station Message Detailed Recording
(SMDR). The charge fee will be counted inclusively as the original call you made or you
receive.
On-hook. Talk.
DPT/SLT/ISDN Extn.
While hearing a busy tone or other tone
Press CO or off-hook.
OR
(CO)
DPT SLT ISDN Extn.
Press TRANSFER.
During ISDN Call Hold During ISDN Call Hold During ISDN Call Hold
Press Recall.
(Recall)
Press R key.
TRANSFER