Filter
Top Products
Customising Your Phone & System
User Manual 209
1. Entering the programming mode (The default of user password is 1234. Ask your dealer.)
2. Programming
3. Exiting the mode
• To delete or change an entry, press CLEAR (TRANSFER).
• To confirm your entry after storing data:
—The STORE button light: Lights red.
—Confirmation Tone:
1 beep: Your entry is accepted.
3 beeps: Your entry is rejected.
• To exit the programming mode at any time, lift the handset.
Enter user password.Dial .
user password
Press PROGRAM.
PROGRAM
END
NEXT
STORE
SELECT
PREV
your entry
programme no.
Enter programme
number (3 digits).
Press NEXT. Enter your entry Press STORE. Press END.
Press SKP+. Press SKP-.
NEXT
SKP
+
SKP
–
Press SELECT.
Press NEXT. Press PREV.
OR
OR
To continue programming
To continue entering selections
To end
To go to the next/previous programme or entry
To enter the desired programme or entry