Filter
Top Products
98 Using the User Option menu
12
To play the highlighted setting, press Play.
13 Press Enter to choose the tone.
14
Do one of the following:
•
to return to the previous menu and choose another option,
press Back, or
•
to exit all menus and return to the standby state, press the
End key.
--End--
Select Ring Volume
Procedure Steps
Step Action
1
While the handset is in the standby mode, press the Cfg soft key.
2 Use the Nav keys to scroll to User Profiles.
3
Press Enter to select User Profiles. The next menu level is
displayed.
4
Use the Nav keys to scroll through the menu and highlight one of
the settings. (an asterisk [*] indicates the selected/active setting).
5 Press Enter to select the option.
6 Use the Nav keys to scroll to Ring Setting.
7
Press Enter to select the option.
8
Use the Nav keys to select Ring Volume.
9 Press Enter to select the option.
10 Do one of the following:
• to return to the previous menu and choose another option,
press Back, or
• to exit all menus and return to the standby state, press the
End key.
--End--
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.