92 Using the User Option menu
• Display Contrast — controls the amount of contrast for the display.
• Keypad Autolock — controls automatic locking of the keypad when the
handset is in standby mode.
Prerequisites
The handset must be in standby mode.
Select Noise Mode
Procedure Steps
Step Action
1
Perform one of the following options:
•
press and hold the FCN key, the User Options menu
appears, or
• while the handset is in standby state, press the Cfg soft key.
2 Use the Nav keys to scroll through the menu and highlight
Phone Options, press Enter to select the option. The next menu
level is displayed.
3 Use the Up and Down Nav keys to scroll through the list and
select Noise Mode.
4 Press Enter..
The Noise Level submenu appears.
5
Use the Nav keys to scroll through the menu and highlight one
of the following settings (an asterisk [*] indicates the selected
setting): Normal, High, or Severe.
6
Press Ok.
7
Perform one of these actions:
• to return to the previous menu and choose another option,
press Back, or
• to exit all menus and return to the standby state, press the
Power Off/End Call key, or press Exit.
--End--
Change the Key Tones
Procedure Steps
Step Action
1 While the handset is in standby mode, press the Cfg soft key.
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.