Filter
Top Products
114 Additional Call Features
3
Press the number key that corresponds to the Override feature
again.
The two parties remaining on the call hear an override tone, a
conference call is established between all three participants. If a
participant disconnects, the other two remain connected.
4 To end the connection, press the End button.
--End--
Forced Camp-on
Follow this procedure to use the Forced Camp-on feature to automatically
ring another handset (internal or external) immediately after that handset
disconnects from its current call. Using Forced Camp-on in conjunction
with Priority Override is referred to as Enhanced Override.
Procedure Steps
Step Action
1
To use Forced Camp-on, if you receive a busy signal after
entering a number, press the LINE button to access the Feature
Keys menu.
2 Press the number key that corresponds to the Override feature
to initiate a Forced Camp-on.
The party that you called receives a tone, and you receive a
ring/ringback signal or busy/engaged signal, depending on the
options chosen. You are now camped-on to the number you
entered.
3
When the party that you called finishes their call, your handset
automatically enters the number. Both your handset and their
handset ring.
To answer a call camped-on to your extension, go to Step 4.
4
When your handset rings, press the Start button.
You can program your handset for either Camp-on or Call
Waiting, but not both.
--End--
Privacy Release
Follow this procedure to use the Privacy Release feature to enable one or
more people who share your DN to join a call.
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.