Filter
Top Products
View Terminal Type 103
2
Press Enter to select the setting.
3
Use the Up and Down keys to scroll through the list and select
Server IP Address.
4 Press Enter.
The Server IP address information appears.
5
Perform one of the following:
•
To return to the previous menu, press Back.
• To return the handset to standby mode, press the Power
Off/End Call key, or press Exit.
--End--
View firmware information
Follow this procedure to view the hardware identification number (MAC
address), downloader version, function file version, and phint1 file version.
Procedure Steps
Step Action
1
While the handset is in the standby state, press the Cfg soft key.
2
Use the Nav keys to scroll through the menu and highlight
System Information.
3 Press Enter to select the setting.
4 Use the Nav keys to scroll through the menu and highlight
FirmwareVersion.
5
Press Enter to view the hardware identification number (MAC
address), downloader version, function file version, and phint1
file version.
6
Perform one of the following actions:
•
to return to the previous menu and choose another option,
press Exit, or
• to exit all menus and return to standby mode, press the
Power Off/End Call key, or press Exit.
--End--
View Terminal Type
Follow this procedure to view the type of public branch exchange (PBX)
terminal the system is using.
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.