Filter
Top Products
74 While on an active call
The call is on hold. In the display area, Call Held appears, and
the phone number that corresponds to the line on hold flashes in
the upper display area.
Attention: If Automatic Hold is enabled, the active call is
automatically placed on hold when you answer the second call.
--End--
Retrieve a call on hold
Follow this procedure to retrieve a call that is on hold.
Prerequisites
You must have a call on hold.
Procedure Steps
Step Action
1
Press the LINE key, and press the line number of the call you
wish to retrieve.
This will access the Feature Keys menu in the active (off-hook)
state.
2 Press Enter.
--End--
Call Park
Follow this procedure to use the Call Park feature for the Nortel IP Phone
WLAN Handset 6100 Series wireless handset. Use the Call Park feature to
hold temporarily (park) and retrieve a call from any telephone or handset.
Call Park does not tie up a line and, when configured network-wide, you
can use it across networks. You can configure a System Park Extension to
automatically park most calls.
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.