Filter
Top Products
76 While on an active call
The caller is put on hold, and you hear a dial tone. An icon
appears beside the Transfer item in the LINE menu, indicating
that the call is transferred.
4
Use the dialpad to enter the number to which to transfer the call.
5
When that number rings or is answered, press the LINE key and
select the Transfer feature again.
The call is transferred.
6 If you put a call on hold to answer and transfer a call, press the
LINE key and select the line you put on hold.
The original call is active.
--End--
Connect calls using Call Join
Follow this procedure to connect calls using the Call Join feature. If you
are on one call while you have another caller on hold, you can merge the
parties to create a conference between the two callers and yourself.
Procedure Steps
Step Action
1
While on a call, press and hold the FCN key and select 3wc,or
press the Conference softkey and Line button.
2
Press the number key of the call that you want to connect to your
current call.
3
To merge the calls, press and hold the FCN key and select 3wc
again, or press the Conference softkey a second time.
The person on hold has joined the conversation.
--End--
Set up a Conference call
Follow this procedure, using the Conference feature, to set up a
conference call for three people (or a maximum of six people, depending
on your handset configuration), including yourself.
Prerequisites
You must be on an active call.
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.