Filter
Top Products
Using the Assign menus 53
Attention: Defining the key type
Procedure Steps
Step Action
1 Each feature key can be defined in one of two ways: Central
or Local. A feature key defined as Central can have a Centrex
feature, such as Call Forward, assigned to it. A feature key
defined as Local can have a directory entry assigned to
it. By default, all feature keys are defined as Central. For
further information about Centrex features, see
Nortel CICM
Fundamentals, (NN10044-111).
From the main menu, open the Feature menu.
A list of the feature keys and their current assignments appears.
2 Scroll through the list and select they key to change.
The Feature submenu appears.
3 Select and open Assign.
4
Press Key Type.
If the key you selected in step 2 is assigned to a Centrex feature,
these soft key labels appear: Key Type and AutoScroll.
If the selected key is assigned to a local feature, these soft key
labels appear: Key Type and Feature.
Attention: The AutoScroll feature is not supported on Nortel
IP Phone WLAN Handset 2210 Series and WLAN Handset 6100
Series wireless handsets.
5
Press Key Type.
The Key Type screen appears. A check mark appears beside
the type currently assigned to the key.
6 To change the key type, select the key type that does not have a
check mark beside it, and press Ok.
--End--
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.