Filter
Top Products
Select Ring Options 95
4
Use the Nav keys to scroll through the menu and highlight
Keypad Autolock.
5 Press Enter to select the setting.
6 Use the Nav keys to scroll through the menu and highlight one
of the following settings (an asterisk [*] indicates the selected
setting): Disable (default), 5 seconds, 10 seconds, and 20
seconds.
7 Press Enter.
8 Do one of the following:
•
to return to the previous menu and choose another option,
press Back, or
•
to exit all menus and return to the standby state, press the
End button.
--End--
Select Ring Options
Follow these procedures to change the ring-tone or any other ring setting.
You must first select a profile, your handset ring behavior is established
by five User Profiles:
• Silent
•
Vibrate
• Loud
•
Soft
•
Custom
The currently-active user profile is shown on the standby display. While
the handset is in standby mode, you can change the ring behavior by
pressing Prof and selecting a new profile from the list. The currently-active
profile is marked with an asterisk (*).
Attention: Check with your system administrator for the Ring Options
available on your handset.
The Ring Options menu has the following:
• Telephone Ring — presents a submenu of choices that you can set:
— Ring Cadence
— Ring Tone (see Note 1)
Carrier VoIP
Nortel IP Phone WLAN Handset User Guide (CICM)
NN10042-116 04.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.