Nortel Networks 4065R Telephone User Manual


 
Audio settings
58
Selecting the ringer type
Use this procedure to switch on the ringer signalling function, and specify
a full melody or a chirp (a short series of tones). The current selection is
indicated by a check mark (o).
To select ringer type:
Selecting the ringer device
Use this function to activate the buzzer (audio alert), vibrator, or headset.
The active function is indicated by a check mark (o).
To select ringer device:
1. Open the Ringer Settings menu as discussed in
“Accessing the Ringer Settings menu” on page 56.
2. Press the arrow keys to scroll and highlight the Type
option.
3. Press the OK soft key.
4. Press the arrow keys to scroll and highlight one of
the following:
Full Melody
Chirp
5. Press the OK soft key.
6. Press the Esc soft key one or more times to return to
the idle display.
1. Open the Ringer Settings menu as discussed in
“Accessing the Ringer Settings menu” on page 56.
2. Press the arrow keys to scroll and highlight the
Device option.
3. Press the OK soft key.
N
N
or
N