Filter
Top Products
Calling features
24
To edit a number in predial mode:
Note:
When predialling, if the input cursor is positioned after the
telephone number, the new digits are inserted at the end of that
telephone number. If the input cursor is positioned at any other point,
the new digits are inserted in front of the insertion point.
Using Quick Call
Use the Quick Call feature to place calls by dialling a one-digit code.
1. Use the arrow keys to position the insertion point.
2. Use the dialpad to enter the new digits.
Press the Backspace soft key to delete an individual
character.
While editing an entry, long-press the Backspace
soft key for three seconds to delete all input
characters and then press the Esc soft key to return
to the previous menu..
3. Press the Hook key to dial.
1. Long-press the number key assigned to the phone
number.
2. Press the Hook key to dial the number.
Note:
If Auto.Quick Hook is enabled, you do not
need to press the Hook key. To enable Auto.Quick
Hook, see “Activating or deactivating Auto. Quick
Hook” on page 70. See “Assigning a Quick Call
number” on page 43 for information about assigning
one-digit codes.
N
d
←
←
:
d