NCR 5953 Wireless Office Headset User Manual


 
Chapter 1: Overview 1-5
Special PC Setup Keypad Layout
On power-up, the operator can switch the DynaKey into an alternate
keypad layout that can be used with many PC BIOS setup and
configuration routines. The alternate layout contains keys such as ESC,
TAB, END, “+”, “-” and arrow keys which are not available in the
normal keypad layout. The alternate layout allows the operator to
configure a PC without an external alphanumeric keyboard. (See the
Installation chapter.)
Three-Track MSR or Two-Track JIS MSR
The 5953 includes an optional integrated International Organization for
Standardization (ISO) three-track analog MSR head or a two-track JIS
MSR head.
Speaker
The 5953 includes a built-in speaker. By default, it sounds key clicks,
but it can be programmed to sound tones under control of the
application program. The speaker is tied to the speaker control of the
host terminal so that whenever the terminal speaker sounds, so does
the 5953 speaker.
Integrated 2 x 20 Customer Display
The Model 5953 supports an optional integrated 2 x 20 VFD customer
display. The display is installed using the 5964-K032 Remote Table Top
Mount and the 5972-F040 Integrated Post Mount.