Filter
Top Products
Chapter 1: Overview 1-3
Multi-Color Power LED
On the face of the USB DynaKey is a multi-color power LED. The
status and condition indicated by the LED are shown as follows.
Status Condition
Green DynaKey power on
Orange* LCD in standby mode (or see note below)
Red FPGA reporting an error condition
Flashing
(red/green)
DynaKey keypad in PC Setup mode
(See Special Keypad mode in Installation)
Off DynaKey powered off
Note: The LED may also be orange for a few seconds on power-up
before display is active.