Filter
Top Products
Quick Start Instructions MultiVOIP User Guide
82
5. Open the HyperTerminal program.
6. Use HyperTerminal to receive and record console messages from the
MultiVOIP unit. To do so, set up HyperTerminal as follows (setup shown is
for Windows NT4; details will differ slightly in other MS operating
systems):
In the upper toolbar of the HyperTerminal screen, click on the
Properties button.
In the “Connect To” tab of the Connection Properties dialog
box, click on the Configure button.
In the next dialog box, on the “General” tab, set “Maximum
Speed” to 115200 bps.
On the “Connection” tab, set connection preferences to:
Data bits: 8
Parity: none
Stop bits: 1
Click OK twice to exit settings dialog boxes.
7. Make VOIP call.
for digital MultiVOIPs
(MVP-2400/2410/3010
for analog MultiVOIPs
(MVP-130/210/410/810)
Make call from an extension of
the local PBX.
Make call on a local phone line
accessing PSTN directly or
through key system