Filter
Top Products
Operation & Maintenance MultiVOIP User Guide
434
5. Identify Files to be Updated. Determine which files you want to update.
Six types of files can be updated using the FTP feature. In some cases, the file
to be transferred will have “Ftp” as the part of its filename just before the
suffix (or extension). So, for example, the file “mvpt1Ftp.bin” can be
transferred to update the bin file (firmware) residing in the MultiVOIP.
Similarly, the file “fxo_loopFtp.cas” could be transferred to enable use of the
FXO Loop Start telephony interface in one of the analog voip units and the file
“r2_brazilFtp.cas” could be transferred to enable a particular telephony
protocol used in Brazil.
File Type File Names Description
firmware
“bin” file
mvpt1Ftp.bin This is the MultiVOIP
firmware file. Only one
file of this type will be in
the directory.
factory defaults fdefFtp.cnf This file contains factory
default settings for user-
changeable configuration
parameters. Only one file
of this type will be in the
directory.
CAS file fxo_loopFtp.cas,
em_winkFtp.cas,
r2_brazilFtp.cas
r2_chinaFtp.cas
These telephony files are for
Channel Associated
Signaling. The directory
contains many CAS files,
some labeled for specific
functionality, others for
countries or regions where
certain attributes are
standard.
H323 PDL file This file is specific to the
particular version of the
H.323 standard being
used. This file rarely
needs to be updated.
inbound
phonebook
InPhBk.tmr This file updates the
inbound phonebook in the
MultiVOIP unit.
outbound
phonebook
OutPhBk.tmr This file updates the
outbound phonebook in
the MultiVOIP unit.