Overview MultiVOIP User Guide
24
Supplementary Telephony Services. The H.450 standard (an addition to
H.323) brings to voip telephony more of the premium features found in PSTN
and PBX telephony. MultiVOIP units offer five of these H.450 features: Call
Transfer, Call Hold, Call Waiting, Call Name Identification (not the same as
Caller ID), and Call Forwarding. (The first four features are found in the
“Supplementary Services” window; the fifth, Call Forwarding, appears in the
Add/Edit Inbound phonebook screen.) Note that the first three features are
closely related. All of these H.450 features are supported for H.323 operation
only; they are not supported for SIP or SPP.
E1 Front Panel LEDs
Because the MVP3010 and MVP30-60 both use a common main circuit card or
motherboard, the LED indicators are the same for both.
Figure 1-4. MultiVOIP MVP3010 Chassis
Active LEDs. The MVP3010 front panel has two sets of identical LEDs. In
the MVP3010 as shipped (that is, without an expansion card), the left-hand set
of LEDs is functional whereas the right-hand set is not.
When the MVP3010 has been upgraded with an MVP30-60 kit, the right-hand
set of LEDs will also become active.