Filter
Top Products
MultiVOIP User Guide Operation & Maintenance
445
After the Java program has been installed, you can access the MultiVOIP using
the web browser GUI. Close the MultiVOIP Windows GUI. Start the web
browser. Enter the IP address of the MultiVOIP unit. Enter a password when
prompted. (A password is needed here only if password has been set for the
local Windows GUI or for the MultiVOIP’s FTP Server function. See “Setting
a Password -- Web Browser GUI” earlier in this chapter.) The web browser
GUI offers essentially the same control over the voip as can be achieved using
the Windows GUI. As noted earlier, logging functions cannot be handled via
the web GUI. And, because network communications will be slower than
direct communications over a serial PC cable, command execution will be
somewhat slower over the web browser GUI than with the Windows GUI.